Replacing the thermostat in your Jeep Wrangler is an important part of maintenance and can help to ensure that your engine runs efficiently and reliably.
Replacing it can also help to reduce the chances of your engine overheating, which can cause major damage.
But how much can a Jeep Wrangler thermostat replacement cost you? On average, you can expect to pay anywhere from $50 to $200 for a new thermostat.
Plus, depending on the mechanic, labor costs could range from $50 to $150. Additionally, you may need to purchase additional parts and supplies.
All in all, replacing the Jeep Wrangler’s thermostat could cost you anywhere from $200 to $400.
Replacing the thermostat in a Jeep Wrangler is a relatively straightforward process. But it is important to follow the correct procedures to ensure that the replacement is successful. And that’s why we’re here.
Jeep Wrangler Thermostat Replacement Cost – What Determines the Price
When it comes to Jeep Wrangler thermostats, the replacement cost will vary depending on a few different factors. These factors can include the year of the Jeep, the model of the Jeep, and even the trim level of the Jeep.
In addition, the replacement cost can also be affected by the dealer that you purchase the thermostat from and the labor costs associated with the replacement.
● Year of the Jeep
If you have an older Jeep, the replacement cost is going to be less than if you have a newer Jeep. This is because the newer Jeeps have more advanced technology and features than the older Jeeps.
Besides, the older Jeeps are not going to have as many miles on them, which can also affect the replacement cost.
● Model of the Jeep
Another factor that can affect the replacement cost of a Jeep Wrangler thermostat is the model of the Jeep. If you have a Jeep that is a higher trim level, the replacement cost is going to be higher than if you have a Jeep that is a lower trim level.
This is because the higher trim levels have more features and options than the lower trim levels. In addition, the higher trim levels also have more miles on them, which can also affect the replacement cost.
● Engine System
Newer models tend to have more complex engine systems than older models. This means that the process of replacing the thermostat can be more involved and, therefore, more expensive.
Additionally, newer Jeep Wranglers may require special tools or equipment in order to replace the thermostat, which can also add to the cost.
In general, replacing a Jeep Wrangler thermostat will cost anywhere from $200 to $400. The exact cost will depend on the factors mentioned above, as well as the specific Jeep Wrangler model you have.
When Is It Necessary to Change the Jeep Wrangler Thermostat?
It’s generally recommended that you change the thermostat in your Jeep Wrangler every 50,000 miles.
However, if you frequently drive in hot weather conditions, you may need to change it more often. A good rule of thumb is to check your thermostat every time you change your oil.
A Jeep Wrangler thermostat replacement is a fairly easy and inexpensive repair. The most common sign of a failed thermostat is engine overheating.
Other signs that the thermostat needs to be replaced include the engine taking a long time to warm up, coolant leaks, and strange engine noises.
Here are some tell-tale signs to look after to know when it’s time to replace the thermostat in your Wrangler-
Sign 1: Engine overheating
If the engine is overheating, the first thing to check is the coolant level. If it is low, add more and see if the problem goes away.
Once you’ve confirmed that the coolant level is adequate, you should examine the radiator for any obstructions. The radiator may be clogged with leaves or other debris, preventing proper cooling.
Sign 2: Broken thermostat
If the radiator is clear, the next step is to check the thermostat. A broken one can cause trouble. If it’s broken, you will need to have it replaced.
The thermostat is located under the hood, usually near the radiator. To check it, remove the housing and the thermostat itself. The thermostat is a small round disc with a spring-loaded center.
Sign 3: The thermostat is stuck in a closed position
If the thermostat is stuck in a closed position, it will need to be replaced. If it is stuck in the open position, it may be possible to clean it and reinstall it. However, it is generally recommended to replace the thermostat if it is not working properly.
Sign 4: The temperature gauge is not reading correctly
If the engine is running hot and the temperature gauge is not reading correctly, it is also a sign that the thermostat needs to be replaced. The temperature gauge is located on the dashboard and is used to monitor the engine’s coolant temperature.
If the gauge is not reading correctly, it could be a sign that the thermostat is not functioning properly. Thus, installing a new thermostat is a relatively easy task that can be completed in about an hour.
So, be sure to follow the instructions that come with the new thermostat to ensure proper installation.
How to Install a New Thermostat in a Jeep Wrangler?
If your Jeep Wrangler is running a bit too hot or cold, it might be time to replace the thermostat. This is a relatively easy process that anyone with basic automotive knowledge can do in about an hour.
Here’s a step-by-step guide on how to install a new thermostat in a Jeep Wrangler.
- Begin by disconnecting the negative battery cable. This will help prevent any electrical shorts while you’re working on the Jeep.
- Next, locate the thermostat housing. It’s located on the engine block, just below the upper radiator hose.
- Loosen the housing bolts with a wrench and take them out. Avoid losing them in the engine compartment.
- Carefully pull the housing away from the engine block, being careful not to damage the gasket.
- Take out the discarded thermostat from its housing and leave it.
- Inspect the housing for any debris or build-up. If necessary, clean it out with a wire brush or some carburetor cleaner.
- Place the new thermostat into the housing and make sure it’s seated properly.
- Re-install the housing onto the engine block and tighten the bolts.
- Reconnect the negative battery cable.
- Turn on the Jeep’s engine and let it run at a low speed for a few minutes. Check the engine temperature gauge to make sure the thermostat is working properly. If it isn’t, shut off the Jeep and repeat the above steps.
Bottom Line
Jeep Wrangler thermostat replacement cost will vary depending on the model you have and what kind of replacement you need.
If your Jeep Wrangler is having issues with its thermostat, it’s important to get it fixed as soon as possible.
A faulty thermostat can lead to all sorts of problems, including engine overheating, decreased fuel efficiency, and more.
The replacement isn’t very costly. However, if you want to cut out the labor cost, just follow our given guidelines on the installation process and you’ll be good to go!